Purge Valves RP Series
Introduction
Purge valves are manual bleed, vent or drain valves. The knurled cap is permanently assembled to the valve body for safety.
One-quarter turn with a wrench from finger-tight obtains leak tight closure during initial installation. Tightening with a wrench ensures closure to the rated pressure with subsequent installations.
Purge valves are manual bleed, vent or drain valves. The knurled cap is permanently assembled to the valve body for safety. One-quarter turn with a wrench from finger-tight obtains leaktight closure during initial installation. Tightening with a wrench ensures closure to the rated pressure with subsequent installations.
◎ Compact design for convenient installation
◎ Bonnet crimped to valve body to prevent accidental disassembly
◎ Straight, tee and cross body constructions
◎ Working pressure up to 4000 psig (276 bar)
◎ Working temperature from -65 °F to 600 °F (-54 °C to 315 °C)
◎ Stainless steel, brass, and carbon steel body materials
◎ End connections:
1/8″ to 1″ and 3 mm to 16 mm tube fitting
1/8 to 1 female NPT
1/8 to 1 male NPT