Home > Products Categories > Fitting > Calibration Fittings and Hoses
Calibration Fittings and Hoses
QH Series Quick-Test Hoses support working pressures up to 6900 psig (476 bar) and a temperature range of -10°F to 140°F (-23°C to 60°C). These hoses feature an outer diameter of 0.2″ (5 mm) and an inner diameter of 0.08″ (2 mm). Hose ends are available in 316 SS or 304 SS and are compatible with fluids such as water, petroleum-based oils, air, inert gas, and compressed natural gas.
HQH Series High Pressure Quick-Test Hose Assemblies support working pressures up to 10,000 psig (690 bar) and temperatures from -40°F to 140°F (-40°C to 60°C). These hoses have an outer diameter of 0.24″ (6 mm) and an inner diameter of 0.08″ (2 mm). Hose ends are available in 316 SS or 304 SS and are suitable for water, petroleum-based oils, air, and inert gas.
Feature Calibration Fittings and Hose
◎ Assembly and disassembly without requirement for a wrench or thread sealant
◎ Flexible hoses with small inside diameter and low internal volume.
◎ Variety of adapters to connect with wide range of calibration devices
◎ Mix-interchangeable with other main brands
◎ Every assembly is factory tested with pure water at 1.5 times the maximum working pressure.
◎ Maximum working pressure: 689 bar (10000 Psig).
◎ Working temperature: 40°F to 140°F (-40°C to 60°C)
◎ Outer diameter of hose: 0.24″ (6 mm)
◎ Inner diameter of hose: 0.08 ” (2 mm)
◎ Hose end materials : 316 SS or 304 SS
◎ Fluid media: water, petroleum based oils, air, inert gas
