Push on is not need use the clamp or Sleeves cause the hose already grip to outside adapter hose, cause use special hose with have lanyard to grip the fitting inside the hose, just only need manual to insert fitting to hose or used tools barbtech. cause of that we call multipurpose push on hoses. In this topic we discussion about accessories for Plastic tube or PFA tube, or rubber hose without push on systems that need others component to help hoses grip to Fitting.

Component :

Clamp Hose

Shank design holds tubing inside diameter securely
The size range of clamp is refer to Outside diameter of Hoses.
◎ Material: 304 SS
◎ Reusable

Hose Connectors Sleeves
This hose-type fitting has a specially designed serrated shank which properly stretches the tube for optimum sealing. An optional sleeve may be used when working pressure is more than 50 % of the maximum working pressure of the tube.

Insert Tube

Insert tube is use for plastic or PFA Tube, we must understand the inside diameter of hose/tube meet to outside diameter of Insert tube, the material of insert tube is stainless steel or brass material.

Working Principle

Below is how to assembly insert tube fitting when assembly to plastic hose or PFA Tube, or others soft tubing

Before begin please select the size of Insert Fitting OD (outside diameter) is similar with ID(inside diameter) Hose.
1. Push Insert Fitting to plastic tube
2. Insert the plastic tube assembly and insert fitting into the body fitting
3. Hold the body Fitting and tighten the nut by turning one quarter turn