Home > Products Categories > Filter > Medium and High Pressure Filter
Medium and High Pressure Filter
Medium and High Pressure Cup-Type Line Filters, 10FC, 15FC, 20FC, and 60FC Series
Medium and High Pressure Cup-Type Line Filters feature a cup-style design that provides approximately six times the effective filter area compared to disc-type units. These filters are ideal for systems requiring maximum filter surface area and high flow rates. They operate at pressures from 690 bar to 4,137 bar and are capable of sustaining high pressure environment from 10,000 psig to 60,000 psig. Filter elements are available with nominal pore sizes of 5, 35 and 65 μm, providing efficient contaminant removal in liquids and gases. A variety of connections are offered for diverse installations conditions. Easy to replace filter elements ensure long term, stable system operation.
Features
- Nominal pore sizes for filter elements: 5, 35 and 65 μm
- Cup design to offer about six times the effective filter area as compared to disc-type units, and recommended in systems requiring both maximum filter surface area and high flow rates
- Easy to replace filter elements
- Pressure differential not to exceed 1000 psig (69 bar) in a flowing condition
Medium and High Pressure Dual-Disc Line Filters, 10FD, 15FD, 20FD, and 60FD Series
Medium and High Pressure Dual-Disc Line Filters feature a dual-disc design that allows segmental trapping of large and small particulates, where the upstream filter element traps the large particulate contaminants, and the smaller pore-size downstream element handle the remaining.They operate at pressures from 690 bar to 4,137 bar and are capable of sustaining high pressure environment from 10,000 psig to 60,000 psig. Filter elements are available with nominal pore sizes of 5/10, 10/35 and 35/65 μm for diverse removal rating needs. Easy to replace filter elements allow for easy maintenance and ensure efficient fluid purification under high pressure.
Features
- Easy to replace filter elements
- Downstream/upstream element nominal pore sizes: 5/10, 10/35 and 35/65 μm; other element combinations available on request
- Pressure differential not to exceed 1000 psig (69 bar) in a flowing condition
- Dual-disc design allows the upstream filter element to trap the large particulate contaminants before they can reach and clog the smaller pore-size downstream element
