Tools High Pressure fitting and Installation Instructions
Manual Presetting Tools
To preset double ferrules onto T15A T20D or series tubing.
Tubing sizes available in 1/8″, 1/4″, 3/8″ and 1/2″ O.D.
Hydraulic Presetting Tools High Pressure Fitting
To preset double ferrules onto T15A or T20D series tubing.
Tubing sizes available in 1/2″, 9/16″, 3/4″ and 1″ O.D.
Die Heads
Manual Coning Tools
Applied in T20M and T60H series tubing for concentric cone processing.
All the manual coning tools use the same basic tools on which the cutter heads and the collets of different sizes can be replaced. A complete ordering number shall include that of the basic tool, collet and cutter head. The collet and the cutter head can be ordered separately.
Manual Threading Tools Medium and High Pressure
Applied in T20M and T60H series tubing for thread processing.
All the manual threading tools use the same basic tools to process threads by replacing threading dies and guide bushings of different sizes. A complete ordering number shall include that of the basic tool, threading die and guide bushing. The threading die and the guide can be ordered separately. For detailed information, please refer to the instruction manual or contact FITOK Group
Manual Reseating Tools Medium and High Pressure
The tool is used for repairing the wearing cone seat of high-pressure fittings or valves. A complete ordering number shall include that of the cutter, antifriction gasket, orientation nut and handle. The cutter, antifriction gasket, orientation nut and handle can be ordered separately. For detailed information, please refer to the instruction manual or contact. medium and FITOK Group
