Alternative Fuel Service Ball Valves(AFS) BU Series
Features Alternative fuel services Ball Valve
Working pressures up to 6000 psig (413 bar)
Working temperature: -40 to 250°F (-40 to 121°C)
High flow-Cv from 4.0 to 13.8
Low-temperature fluorocarbon material provides sealing capability over full temperature range
Spring-loaded seat provides leak-tight integrity in both low-and high-pressure systems and reduces seat wear from pressure surges
A variety of end connections available
Low operating torque
All wetted components are compatible with hydrogen and compressed natural gas (CNG)
No packing adjustment required
Bi-directional flow
Options for handle colors
Pneumatic actuators available
Each valve is leak tested with Nitrogen or compressed air at working pressure to meet a requirement of no visible leak
Field repairable with seal kit
ECE R110 type approval available
CNG/NGV Application
ECE R110 Manual Service Valve Type Approval
Classification: Class 0
Temperature: -40 to 248°F ( -40 to 120°C)
Pressure: 3370 psig (260 bar)
To order, add -R110 to the valve ordering number.
oxygen-enriched environment or hazardous media service
Note:
The working pressure of valves is restricted by materials of the valve body and seat, as well as end connections. When choosing a valve for your applications, please refer to the above Temperature vs. Pressure Curves and the pressure rating in the dimension table. The minimum value shall be the pressure rating of the valve.
When the connection type of valves is FITOK double ferrule tube fitting, the working pressures of the valves are related to the wall thickness of tubing applied. For specific working pressure of the valves.
Cleaning and Packaging:
FC-01: Standard cleaning and packaging for general industrial procedures.
FC-02: Special cleaning and packaging for wetted system components to ensure compliance with product cleaning requirement of ASTM G93 Level C
