Back Pressure Regulator
BPR-1 Series Back Pressure Diaphragm Regulators
Feature Back Pressure Regulators
Metal-to-metal seal with convoluted diaphragm
Close pressure differential between crack and reseat
Panel mounting available
Maximum control pressure: 250 psig
Pressure control range: 0~25,0~50,0~100 or 0~250 psig
Material of the main components:
Seat: PCTFE
Diaphragm: Hastelloy
BPR-2 Series Back Pressure Piston Regulator
Durable piston-sensed design
Bubble-tight shutoff at all reseating pressure
Low operating torque
Panel mounting available With special cleaning and packaging, applicable to oxygen-enriched environment
Maximum control pressure: 1000 psig
Pressure control range:50~300, 100~500 or 200~1000 psig
Material of the main components:
Piston: 316L
O-rings: Viton or Kalrez
BPR-3 Series Back Pressure Piston Regulators
Control of back pressure up to 10000 psig for gas or liquid application
Safe and reliable piston sensing pressure control ranges
Panel mounting available
Special cleaning and packaging available for application in oxygen-enriched environments
Maximum control pressure:
Stainless steel: 10000 psig
Brass: 6000 psig
Typical Application Line Pressure Regulator BPR-1 : When the system pressure is lower than the set pressure, the diaphragm obstructs the flow by the force of spring. When the system pressure is higher than the set pressure, the diaphragm compresses the inner spring to connect the flow so as to allow the fluid to pass through the regulator to keep the pressure of the Storage Vessel stable.
Typical Application BPR-2 Series Piston Regulator maintain the required pipeline pressure to ensure the Pump to output fluid stably when system pressure fluctuates.
How they work
Regulator equipment is work the opposite way certainly regulate the inlet (upstream) pressure by opening up only as much as necessary to hold back the desired pressure at the inlet (upstream).