Home > Products Categories > Manifold > Air Header and Distribution Manifold > Air Header AH Series
Air Header AH Series
AH Series Air Headers feature a modular design with standard 4- and 6-outlet modules for easy installation and maintenance, reducing time and costs. A variety of inlet, outlet, and vent options are available. The outlet is equipped with a ball valve for isolation, allowing distribution, diversion, and allocation of gas sources. These headers support pressures up to 1,000 psig and operate within a temperature range of 0 to 250°F (-18 to 121°C). Every air header is factory leak-tested with air or nitrogen at the rated working pressure.
Air header are designed to distribute air from the compressor to the actuators on pneumatic instruments, such as steam flow meters, pressure controllers and valve positioners. These manifolds are widely used in industrial pulp and paper, chemical processing, oil and gas processing and energy industries and are approved for low pressure applications up to 1000 psi (threaded or Flange end connections).
Typically have multiple outlets fitted with ball valves for isolation. When compressed air, steam, etc. contain water vapor to be discharged, can be assembled vertically, and a drain valve (as shown in the following figure) can be installed at the bottom to regularly discharge condensed water from the headers to prevent water from entering the pneumatic instrument. Thus, realizing the functions of air source diversion and distribution.
Key information for selection:
- Process conditions to connected to Flare header
- Connection size and type?
- Is a valve required at inlet?
- Outlet quantity? Is a valve required at outlet? Or valve with plug?
- Is a Atmospheric vent port required? And is a valve or plug required?
- Is mounting bracket required?
- Drain or sewer
Application
The application in air piping system with function is distribute air from main line to instrument equipment is to supply air to operated moving pneumatic actuator. Supply air to purging system with flushing etc.
AH Series
- Working pressure up to 1000 psig
- Working temperature: 0 to 250°F (-18 to 121°C)
- Modular design for easy installation and maintenance
- Standard module with 4 or 6 outlets available as an accessory and can be ordered separately
- Multiple choices of inlet and vent types, and in-line replacement available
- Every air header leak tested at factory with air or Nitrogen at rated working pressure
