General Information Stainless Steel Tubing

Instrumentation Stainless Steel Tubing

Stainless Steel Tubing Available in TMP series and TCT series.
TMP series seamless straight-length tubing, pickled or bright annealed, external surface mechanically polished.
TCT series coiled tubing, bright annealed, external surface mechanically polished.
Materials: stainless steel, duplex stainless steel or Nickel-based alloy. Enhanced-16/316L, with Ni, Cr and Mo contents in close approximation to upper values in ASTM standard, are available.

Steel Tubing
TMP-TCT Tube

Sizes: TMP series seamless : 1/16″ to 2″ 2 mm to 50 mm, .
TCT series seamless : 1/4″ to 1/2″ 6 mm to 12 mm, .
Standard length TMP series : 10 ft, 20 ft 3 m and 6 m in straight lengths.
TCT series : up to 2130 ft 650 m in coils.


High Purity Tubing

Steel Tubing Available in TB and TEP series.
TBA series straight-length tubing, specially rolled and bright annealed, inner roughness of Ra 20 μin. (0.51 μm) max.; ultrasonically cleaned and dried; suitable for high-purity gas systems.

Steel Tubing
High_Purity_Tube_TBA

TEP series tubing, machined from TBA series tubing, electropolished inner surface finish of Ra 10 μin. (0.25 μm) max.;
ultrasonically cleaned in clean room and purged with filtered hot Nitrogen; suitable for ultra-high purity systems.
Material : 316L stainless steel.
Sizes : 1/4″ to 2 1/2 “, 6A to 50A.
Standard length : 20 ft , 4 m and 6 m.

Medium and High Pressure Tubing

Medium and High Pressure Tubing Heavy-wall
Available in T15, T20 and T60 series.
T15 series tubing, seamless in straight lengths, annealed or , 1/8-hard with working pressure up to 15,000 psig (1034 bar).
T20 series medium pressure tubing, cold-drawn and full hard, with working pressure up 20,000 psig (1379 bar), for coned and threaded connections. to seamless in straight lengths.
T60 series high pressure tubing, cold-drawn and full hard, with working pressure up to
60,000 psig (4137 bar), for coned and threaded connections. seamless in straight lengths,
Material: 316/316L stainless steel.

High Pressure Fittings
Medium and High Pressure Tube

Sizes :
T15 series: 1/8″, 1/4″, 3/8 “, 1/2″, 9/16″ 3/4”.
T20 series: 1/4″, 3/8″, 9/16″ 3/4″ and 1″
T60 series: 1/4″, 3/8″and 9/16″.
Standard length : T15 series: and 20 ft and 6 m
T20/T60 series: supplied in fractional sizes up to 20 ft and metric sizes up to 6 m.
Nipples in custom length available.

Jacketed Tubing and Insulated Tubing

Available in TJT and TIT series.
TJT series jacketed tubing, seamless, corrosion and abrasion resistant, available in straight lengths or coils.
TIT series insulated tubing, seamless, thermal insulating, corrosion and abrasion resistant, supplied in coils.

Jacket Tubing
Jacketed Tubing and Insulated Tubing

Materials: stainless steel or copper.
Sizes: 1/4″ to 1/2″ 6 mm to 12 mm.,
TJT series : Standard length: 20 ft 6 m in straight lengths, or up to 2130 ft 650 m in coils.
TIT series : up to 1100 ft 330 m or in coils.

Heat Trace Tubing

TST series steam trace tubing, seamless, maintains process temperature 50°F to 200°F (10°C to 93°C) and 200°F to 355°F (93°C to 179°C), light heat trace and heavy heat trace available, supplied in coils.
Materials: stainless steel or copper
Sizes : 3/8″, 1/2″ 6 mm, 8 mm and 10 mm
Standard length: up to 1050 ft or 300 m in coils.

steel tubing
Heat Trace Tube
Pipa Tubing
Pipa Tubing

Working Pressure
Working pressures are calculated based on ASME B31.3. To determine working pressures at elevated temperatures, multiply the
working pressures at ambient temperature by the elevated temperature factors.
For more details, refer to applicable sections below.

We are PT. Solutec Daya Mandiri is ready provided tube for your needs. Please contact us.